Bill of Quantity (BOQ) for Painting Work

Bill of Quantity for Painting Work

A Bill of Quantities (BOQ) for painting work is a document that provides a detailed list of materials, labor, and other resources required to complete a painting project. It is typically used in construction and renovation projects to facilitate accurate cost estimation and project management.

The BOQ serves as a comprehensive guide for contractors and suppliers, outlining the specific quantities and specifications needed for the painting work

“Here is a sample of the bill of quantity for Painting work, formatted as follows:

Click here below download button for to download this BOQ

Bill of Quantity For Painting Work

Si.No	Description	Unit	Quantity	Unit Rate	Amount	Remark
A	All works must be according to drawings, specification and engineer instructions. Rates shall include Aas following "a" to "e"
a	All the painting materials used same as specified in project and should be approved and tested by approved local laboratory and have the final approved from the supervisor engineer.
b	The surface must be dry and clean before painting.
c	All painting works should provide the required coverage.
d	All paint works must be according to specifications , drawings and supervisor engineer instructions.
e	Smoothen surfaces of existing plastering before the Commencement paint
	Prices of painting works for walls & ceilings shall include supply of all materials, scaffolds, workmanship & tools and anywhere else, needed, all according to drawings, specifications, and conditions and directed instructions by the Engineer or his representative.
1	Painting work for - Internal
1	For Oil Based Paint
1.1	Applying surface grinding to make an smoothen surface	m2
1.2	Supply & Apply one coat primer over the smoothened surface (material as per project Specification )	m2
1.3	supply & apply two coasts of wall care putty over the primer surface (material as per project Specification )	m2
1.4	supply & apply First & final coat Painting over the wall care putty surface (material & color as per project Specification )	m2
1.5	For Service ducts / Lift (as per project specification )	m2
1.6	Above false ceiling areas (as per project specification )	m2
2	For water Based Paint
2.1	Applying surface grinding to make an smoothen surface	m2
2.2	Supply & Apply one coat primer over the smoothened surface (material as per project Specification )	m2
2.3	supply & apply two coasts of wall care putty over the primer surface (material as per project Specification )	m2
2.4	supply & apply First & final coat Painting over the wall care putty surface (material & color as per project Specification )	m2
2.5	For Service ducts / Lift (as per project specification )	m2
2.6	Above false ceiling areas (as per project specification )	m2
3	Painting work for - External
3.1	Supply & Apply one coat primer (material as per project Specification )	m2
3.2	supply & apply First & final coat Painting over the primer surface (material & color as per project Specification )	m2

	Total Value of Work done