A portable grinder must be inspected before use to ensure safety and efficiency. This checklist helps identify potential hazards, verify proper functionality, and maintain compliance with safety standards. Use the table below to conduct a thorough inspection.
Portable Grinder Inspection Checklist
| Equipment / Machinery Inspection Checklist | ||||
| Contractor Name : | Date : | |||
| Project Name : | Reference : | |||
| Location : | Check List Number : | |||
| Equipment / Machinery Name : | PORTABLE GRINDER | |||
| Equipment / Machinery Model : | ||||
| Equipment / Machinery Make: | ||||
| Note: Write "Yes" or "No" in the given box. If there are any comments, write them in the comements box. | ||||
| S.no | Inspection Item / Checklist Item | Yes / No | Comments | |
| 1 | Ensure the machine is in good working condition. | |||
| 2 | Verify the power cable is undamaged and properly connected. | |||
| 3 | Confirm a flexible cord is provided to prevent cable damage. | |||
| 4 | Check that the motor capacity (RPM) is clearly marked. | |||
| 5 | Make sure the dead man switch is functioning properly. | |||
| 6 | Ensure a handle is provided for better control. | |||
| 7 | Confirm the wheel guard is properly installed with a gap of no more than 3mm | |||
| 8 | Check that the grinding/cutting wheel is free from defects and correctly rated. | |||
| 9 | Verify a designated key is used for wheel removal and replacement. | |||
| 10 | Make sure the grinder is operated by a trained and competent person. | |||
| 11 | Confirm the RPM of the wheel is higher than the motor’s RPM. | |||
| 12 | Ensure the grinder is double-insulated or properly grounded. | |||
| Overall Remarks | ||||
| ✅ FIT – Safe to use with no issues. | ||||
| ⚠️ PARTIALLY FIT – Requires minor repairs before use. | ||||
| ❌ UNFIT – Do not use until fully repaired. | ||||
| Inspection Conducted By | Reviewed by : | |||
| Name: | Name: | |||
| Signature & Date: | Signature & Date: | |||